 |
Specifications of Ceramic Fibre Blanket
| PRODUCT |
BULK FIBRE |
BLANKETS |
MODULES |
BOARDS / SHAPES |
SPECIALITIES |
| PROPERTIES |
(1) HTZ
(2) RTZ
(3) RT
(4) LT |
(1) HTZ
(2) RTZ
(3) RT
(4) LT |
(1) HTZ
(2) RTZ
(3) RT
A B
ANCHORED VENEER
CERLOCK
PREMAX
CERLANCE & LOCK |
THERMOTECT
(1) 80
(2) HTZ
(3) HS
(4) A
(5) RT / RTZ
(6) LT |
(1) Wet Wrap
(2) Paper / Roll Board
(3) Coating M / Z / ZL / S
(4) Veneer Mortar
(5) Mouldable Joint Pax / F
(6) Pumpable HT / RT / AR / WR
(7) Rope RT / HTZ |
| Maximum Use / Grade temperature, °C |
(1) 1425
(2) 1300
(3) 1260
(4) 1000 |
(1) 1425
(2) 1300
(3) 1260
(4) 1000 |
(1) 1450
(2) 1325
(3) 1300 |
(1) 1600
(2) 1425
(3) 1260
(4) 1260
(5) 1260
(6) 1000 |
(1) 1260
(2) 1260 / 1400
(3) 1600 / 1700 / 1700 / 1800
(4) 1600
(5) 1260
(6) 1400 / 1260 / 1260 / 1000
(7) 1260 / 1400 |
| Dimension, mm unless stated |
Application |
Width - 610,
Length - 7620 |
A: 305 x 305
B: 305 x 305 |
305 x 610, 457 x 914
610 x 610, 610 x 914
914 x 1219, 500 x 1000
Shapes on Request |
(1) 610 x 914
(2) 1000 x 1000
(3) 30 / 45 / 45 / 40 Kg. Container
(4) 40 Kg. Container
(5) 25 Kg. Container
(6) 20 Kg. Container
(7) Running Length |
| Density, Kg / m 3 (lbs, cuft) |
80 to 192
(5 to 12) |
64, 96, 128 and 160 (4, 6, 8 and 10) |
A: 160 (10)
B: 128 (8), 160 (10) |
(1) 512-608 (32-38)
(2) 320-384 (20-24)
(3) 640-740 (40-45)
(4) 416-480 (26-30)
(5) 320-384 (20-24)
(6) 272-352 (17-22) |
(1) 320 (20) Dry
(2) 192 (12)-256 (16)
(3) 1510 / 1920 / 1920 / 1750
(4) 1950 (109)
(5) 530 (33)
(6) 320-400 (20-25) Dry
(7) 200-356 (12-18) |
| Thickness, mm |
|
(1) (2) (3) : 6,13, 19, 25, 38, 50
(4): 25, 50 |
A: 100, 150, 200, 250, 300
B: 50, 75, 100, 150 |
6, 13, 19, 25, 38, 50, 63, 75 |
(1) 6, 13, 19, 25
(2) 1, 2, 3, 4, 5, 6, 10, 12
(3) 6, 13, 19, 25, 38, 50 |
| Thermal Conductivty at mean temperature of 550 °C W/m°K (BTU-in/hrft 20 F) |
0.12 (0.83) |
0.11 (0.76) for 128 Kg./m 3
0.13 (0.9) for 96 Kg./m 3 |
0.12 (0.84) |
(1) (4) : 0.12 (0.84)
(2) (5) (6) : 0.11 (0.8)
(3) : 0.13 (0.9) |
(1) 0.13 (0.90) on drying.
(2) 0.12-0.13 (0.9)
(3) 0.15 (1.0)
(4) 0.15 (1.0) |
| Application |
Expansion joints, packing and filing, secondary processing. |
Crude Oil, reformer and pyrolysis heater linings, high temperature pipe, duct and turbine insulation, tube seats, gaskets and expansion joints, annealing furnaces, reheating furnaces, baking pit covers and repairs. Kins Kin cars insulation and seals. Stress relieving insulation, ovens and stack linings. Boilers and air preheaters insulation. Fire protection applications etc. |
A: High temperature lining for Heaters, furnaces, reformers, kilns, soaking pit seals.
B: Hot face veneering over existing brick or monolithic refractory lining in furnaces, heaters, kilns etc. |
Combustion chambers of boilers and heaters, hot face lining for furnaces and kilns, backup insulation to monolithic and bricks. Ladle covers, Aluminium trough liners, trough covers, Expansion joints, hot gas duct linings, riser sleeves, crucibles, launders, tap out cones, sight holes etc. |
1. Combustion chamber lining, boiler doors, stack lining.
2. Gaskets, ingot moulds, insulation.
3. Surface stabilization for modules in areas of flame impingement, high velocity gases or chemical attack.
4. For sticking veneer modules.
5. Protective coating, patch repair work, sealing.
6. Insitu backup insulation repair, Gap filling, Aluminium resistant & Water resistant applications.
7. Expansion joints, gaskets, sealing, wrapping, substitute for asbestos. |
For Information on Ceramic Fibre Click Here
HYSiL
Insulation Blocks and Pipe Coverings
HYDERABAD INDUSTRIES LIMITED,
Run by a team of dedicated profession has grown from a pioneer to an organization occupying an eminent position in the industrial sence of india . The Company has the backing o the vast and varied experience and expertise both organisational and technical Of one of the largest business house of India.
HYSIL, a new generation calcium silicate based thermal insulation was started in 1979. over a decade of intensive research field experience and continuously improving manufacturing skills have given HIL an envied position in the Industrial Insulation field today. HIL is equipped to serve the requirement of Insulation world backed by a R&D lab fully equipped with pilot plant and testing equipments.
HYSIL is manufactured under technical knowhow obtained from Cape Insulation of U.K. It provided for the first time in India Thermal Insulation blocks and Pipe Converings of quality equivalent to the best in the world and conforming to international standards.
General Description
HYSIL. Insulation Blocks and Pipe Coverings are made from Hydrated Calcium Silicate reinforced with non-asbestos fibres. It is a rigid material with high compressive strength and low shrinkage at high temperature. Also the material ha very low thermal conductivity. The large Blocks and Pipe Covering can be easily cut and shaped at site carpenter's tools.
Advantages
• Reduced fuel cost due to low thermal conductivity andlow thermal capacity.
• Consistent physio-thermal performance throughout its life.
• Reduced heat loss due to fewer joints.
• Longer life of 3 to 4 times the fibrous material due to high strength and resistance to vibrations.
• Zero maintenance for entire life of over 25 year.
• Economical as compared to conventional insulation.
• Can absorb thermal shocks.
• Physiothermal properties remain unaffected after repeated water wetting & subsequent drying.
Product Data
Grades available:
HYSIL – 1000
HYSIL - 800
Blocks
Standard Size : 900x600mm
900x300mm
900x150mm
600x150mm
Thickness: 25, 40, 50, 65 & 75mm
Special size and Thickness available on request.
Performed, Rigid Pipe Covering's
To suit pipe NB 12.7 mm (1/2”) to cylindrical vessels of size 914.4mm (36”).
Pipe covering in two half Sections. Radlus beveled Lags Curved Segments/and Bevelled Lags (sidearch type).
Standard length = 900mm
Thickness = 50 and 75mm
Other thickness available on request.
|
 |
